Reduction-plug H150mm L=900mm zinc-lamella DKC URH059HDZL

When designing and constructing cable routes based on the "U5 Combitech" heavy-duty industrial tray system, it is sometimes necessary to connect trays of different widths. In this case, a reducer (or transition) is used. A DKS reducer-plug is also used at the ends of the route as an end cap. The accessory is installed on the tray using fasteners: M6 nut (code SM100600) and M6x16 bolt (code SM010616). The reducer is designed for trays with a side height of 150 mm. Accessory length - 900 mm. Accessories in the "Zinc-flake coating" version have a coating based on magnesium resin with zinc and aluminum flakes and demonstrate better corrosion resistance than zinc coating of the same thickness, being only slightly inferior to stainless steel.