Brush entry for new IT CQE 400mm RBRUSH40 DKC

Brush entry for IT-CQE-N series floor cabinets, 400 mm long, is installed on the edges of two consecutive 200x70 mm holes or two 200x100 mm holes for cable entry into the cabinet roof or base. Installation is performed on one edge for 70 mm wide holes or on two edges for 100 mm width, by sliding the entry onto the metal sheet. To install the entries, the closing plate must be knocked out in advance. The purpose of the brushes is to protect cables from damage against the edges of the holes and to limit the ingress of dust and debris into the cabinet. A total of 4 to 11 entries of 200 mm size can be in the roof or base, depending on the cabinet size. Using a 400 mm long brush allows combining two consecutive 200 mm wide entries. It is permissible to use 400 mm long brush entries together with 200 mm long brush entries on one part or to use them for replacement.