Lite IP55 Wall-mounted climate cabinet W821xHxD566mm RAL 7035 ser. muar NIKOMAX TWK-158256-M-GY-KIT01

Climatic II series wall-mounted cabinets are an all-weather solution designed for outdoor use or in indoor environments where temperature and humidity fluctuations do not significantly differ from those outdoors, and there is relatively free access to outdoor air, such as in uninsulated metal buildings. They provide protection for telecommunications equipment from negative environmental impacts and unauthorized access. A key feature of the Climatic II series cabinets is the pre-installed microclimate control system and a removable panel with sealed cable entries. The cabinet enclosure features a metal welded construction providing protection against external factors and is lined with an insulating layer with a foil coating inside, which increases thermal insulation and reduces heat loss through the cabinet walls. The cabinet is equipped with 4 depth-adjustable 19” mounting rails for equipment placement. Distance between rails: depth - 307 mm, width - 450 mm. A removable panel with 6 sealed cable entries is located at the base of the cabinet. The cabinet door has concealed hinges, a sealing contour, and is equipped with a reliable five-point locking system with three-point locking and no protruding parts. Maintaining the required microclimate inside the cabinet is ensured by a forced ventilation and heating system controlled by a thermostat. Ventilation openings located in the cabinet roof are equipped with replaceable filters and protected by anti-vandal grilles. Two mounting methods are provided: wall-mounted or pole-mounted (the pole mounting kit is not included in the delivery set). The cabinet is designed for operation in temperate climate regions at temperatures from -40 to +40 °C and relative humidity not exceeding 80% at 25 °C, with placement category U2 according to GOST 15150-69. The degree of protection against foreign objects and water corresponds to IP55 according to GOST 14254-96 (IEC 529-89). The cabinet is powered from an external AC electrical network of 220V, 50Hz. The grounding wire for the door to the cabinet enclosure is included in the basic configuration. The maximum allowable distributed load on the cabinet is 150kg. The cabinet is supplied fully assembled.