Autonomous water supply station ASV-800/24N Vikhr 68/1/7

POWER, W - 800 TYPE - Surface NETWORK VOLTAGE, V - 220 FREQUENCY, HZ - 50 MAX. WATER TEMPERATURE, °C - 35 MAX. SUCTION DEPTH, M - 9 CAPACITY, L/MIN - 60 DIMENSIONS, CM - 53 x 28.5 x 51.5 PRESSURE TANK CAPACITY, L - 24 INLET PIPE DIAMETER, INCH - 1 MATERIAL - Stainless steel OUTLET DIAMETER, INCH - 1 HEAD HEIGHT, M - 40 The VIKHR ASV-800/24N pumping station is designed for uninterrupted water supply to cottages, summer houses, and farms. It maintains the required pressure in the water supply system in automatic mode, turning on and off independently as water is consumed by users. This model has sufficient power of 800 W, a maximum suction depth of 9 meters, a maximum water flow of 60 liters per minute, and a maximum head of 40 meters. The pressure tank capacity is 24 liters. The ASV-800/24N model is the "golden mean" in the VIKHR pumping station line. Notable features include good head and water flow parameters despite the low power. Additionally, the housing is made of stainless steel. The electric motor of the pumping station is asynchronous, single-phase with a short-circuited rotor. The pump with a built-in ejector combines the advantages of centrifugal pumps with the practicality of self-priming pumps. The pump part housing is made of glass-filled polypropylene with brass inserts for rigidity, as well as cast iron and stainless steel. To prevent wear of the threaded connections, the inlet and outlet openings have metal threads. The unit's pressure tank serves to accumulate water under pressure and smooth out water hammer effects. It consists of a steel reservoir with a replaceable membrane and has a pneumatic valve for charging compressed air. Advantages: Presence of thermal protection. In case of water supply failure or prolonged use at maximum load, the protective automation will de-energize the pump. Automatic switching on (pressure drop in ASV to 1.5 atm) and switching off (pressure in the tank 3 atm). Special ASV mountings for additional stability. Built-in internal ejector with a Venturi tube system allows pumping water with lower requirements for water purity and dissolved gases compared to conventional centrifugal pumps, and also provides a self-priming function. Presence of metal threads on the inlet and outlet openings.