LED luminaire LE-SBU-32-075-3592-67X "KEDR TG" KSS "G" with tempered glass LED-effect 3592

KEDR 2.0 TG SBU - new generation wall-mounted industrial LED luminaires. The LED module is covered by a diffuser made of silicate tempered transparent glass. KEDR 2.0 TG SBU series luminaires are used for lighting premises with fire hazard zones P-II; P-IIa. During development, the innovative FINFREE heat dissipation technology was used, which allowed increasing the efficiency of light fixtures to 140 lm/W (including all possible losses). The luminaires also have the thinnest housings in the professional lighting class, the housing thickness is only 7 mm. KEDR 2.0 TG SBU luminaires are designed for mounting on walls/beams; they can also be installed on chains or cables. The series is equipped with a swivel yoke with discrete tilt angle adjustment. To create the necessary light environment, KEDR luminaires are equipped with secondary optics made of light-stabilized polycarbonate, developed by "LED-Effect" specialists. A flexible configuration system allows manufacturing luminaires of the required power in the range from 25 W to 300 W, at the customer's choice. KEDR series luminaires are equipped by default with cool white LEDs (5000K); also, at the customer's request, neutral white (4000K) or warm white (3000K) LEDs can be installed. The luminaire housings are powder-coated, and the structural elements are made of galvanized steel and are resistant to environmental influences. The thoughtful design of the luminaires allows for replacing the power source without dismantling the luminaires. The luminaires have a high degree of protection against environmental influences – IP67. You can buy industrial LED lighting on our website. Fire hazard zone classification: P-I zones located in premises where flammable liquids with a flash point above 61°C are handled; P-II zones located in premises where flammable dust or fibers with a minimum cloud point of 65 g/m³ by air volume are released; P-IIa zones in premises where solid flammable substances are handled in quantities where the specific fire load is at least 1 megajoule per square meter; P-III located outdoors in zones where flammable liquids with a flash point above 61°C or solid flammable substances are handled.