35342600R JSC "Dielectric Cable Systems"

The product is intended for extending a route (between two trays or between the last tray and an accessory). The installation of additional supports is determined by the geometry of the route; however, the use of an expander is allowed on spans up to 1.5 m. Installation of supports in the standard configuration is allowed at a distance of 100 mm from the point where the sides of the route being connected by the expander end. After installation, the product must be firmly secured on both sides through all the holes provided (both in the side walls of the product and in its base). Additional holes in the straight section of the tray for connection with the expander holes must be made on-site. The connection of the expander with the accessory is assumed only through the standard holes of the accessory. Execution – "steel, galvanized by the Sendzimir method". Insert length – 600 mm. Used with a tray height of 100 mm and a width of 150 mm.