Telescopic tray extension 200x50 L600 mm 35264600R DKC

The product is designed for extending the route (between two trays or between the last tray and an accessory). The installation of additional supports is determined by the route geometry, while the use of the expander is permitted on spans up to 1.5 m. In a standard configuration, installing supports is permissible at a distance of 100 mm from the point where the sides of the route being connected by the expander end. After installation, the product must be rigidly secured on both sides through all provided holes (both in the side walls of the product and in its base). Additional holes in the straight section of the tray for connection with the expander holes must be made on-site. The connection of the expander to an accessory is intended only through the standard holes of the accessory. Execution – "steel, galvanized by the Sendzimir method". Insert length – 600 mm. Used with a tray with a height of 50 mm and a width of 200 mm.