Telescopic tray extension 400x80 L600 mm 35306600R DKC

The product is intended for extending a route (between two trays or between the last tray and an accessory). The installation of additional supports is determined by the route geometry, while the use of an expander is permitted on spans up to 1.5 m. Installation of supports in the standard configuration is allowed at a distance of 100 mm from the point where the sides of the route being connected by the expander end. After installation, the product must be rigidly fixed on both sides through all the provided holes (both in the side walls of the product and in its base). Additional holes in the straight section of the tray for connection with the expander holes must be made on-site. Connection of the expander with an accessory is assumed only through the standard holes of the accessory. Execution – "steel, galvanized by the Sendzimir method". Insert length – 600 mm. Used with a tray height of 80 mm and a width of 400 mm.