Thermostat for underfloor heating pro bk atl Welrok 4660251141615

Welrok pro bk atl - a thermostat for underfloor heating with weekly schedule programming capability. You can set up to 16 intervals for each day of the week. On holidays, you can set an individual schedule if desired. The list of holidays can be selected from a ready-made template or created individually. The kit includes adapters for Atlas Design frames from Systeme Electric, BRITE from IEK, Stockholm, and Epica from EKF. The Welrok pro bk atl thermostat has 3 heating modes: "Air", "Floor", and "Air with floor limit". For parquet or laminate floors sensitive to overheating, the air heating with floor limit mode is suitable. This way, a comfortable air temperature will be maintained without allowing the floor to overheat. The Welrok pro bk atl thermostat can operate in two modes - "Cooling" and "Heating". The thermostat is designed for electric and water underfloor heating and heaters. Control of water underfloor heating is carried out using a normally closed or normally open electrothermal actuator with an operating voltage of 230 V. Welrok pro bk atl has 2 temperature sensors: a built-in air temperature sensor and an external floor temperature sensor. The thermostat is also compatible with floor temperature sensors from other manufacturers: 4.7, 6.8, 10, 12, 15, 33, 47 kOhm at 25 °C. Savings on heating or cooling – Maximum savings are achieved by programming the heating schedule. In addition, the thermostat: – Allows setting an economy temperature for your absence period; – Detects a sharp temperature drop when a window is open and turns off heating for 30 minutes; – Keeps track of electricity consumption statistics for 1, 7, 30 days and for the entire operating time. For correct statistics operation and air temperature measurement, it is necessary to enter the power of the load connected to the thermostat. For comfort lovers, a pre-heating function is provided in the thermostat. In Schedule mode, the thermostat will turn on heating in advance so that the comfortable temperature is already reached by the start of the specified period. The Setup Wizard simplifies the configuration of basic parameters. It starts automatically upon the first power-on or from the regulator menu and guides the user step-by-step through the essential settings for the regulator's operation. The non-volatile memory of the thermostat saves all settings and the heating schedule in case of power failure. To prevent anyone from accidentally changing the thermostat parameters, you can lock the buttons. Additionally, the device has overheat protection: if the temperature inside the housing reaches 85 °C, the thermostat will turn off the heating and notify you. When the temperature drops to 75 °C, the thermostat will resume operation.