Horizontal tray angle 45deg. 200x50 steel 1mm "PLUS" GLplus45-50-200 HD KM PL1377 KM SYSTEM

To change the direction of the cable route, we recommend using a 45-degree horizontal angle from the "PLUS" series, which allows for turning power and low-voltage lines in a horizontal plane, while the prepared ends of the product for lap jointing accelerate the installation process. The section is suitable for connection with a metal sheet tray of the same series with a width of 200 mm and a side height of 50 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity, low-pollution environments, outdoors, and in mildly corrosive environments, in accordance with GOST 15150-69. For additional protection of the cable route element from mechanical damage, dust, and debris, use a cover for the "PLUS" series angle.