Horizontal tray angle 45deg. 300x80 steel 1mm "PLUS" GLplus45-80-300 HD KM PL1385 KM SYSTEM

To change the direction of the cable route, we recommend using a 45-degree horizontal angle from the "PLUS" series, which allows for turning power and low-voltage lines in the horizontal plane; the prepared ends of the product for overlapping joints accelerate the installation process. The section is suitable for connecting with a metal sheet tray of the same series with a width of 300 mm and a side height of 80 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. For additional protection of the cable route element from mechanical damage, dust, and debris, use a cover for the "PLUS" series angle.