Horizontal tray angle 45deg. 500x80 steel 1.2mm "ПЛЮС" GLplus45-80-500 HD КМ PL1387 СИСТЕМА КМ

To change the direction of the cable route, we recommend using the "PLUS" series 45-degree horizontal angle, which allows for turning power and low-voltage lines in the horizontal plane, while the prepared ends of the product for lap joints accelerate the installation process. The section is suitable for connection with a metal sheet tray of the same series with a width of 500 mm and a side height of 80 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in mildly corrosive environments, in accordance with GOST 15150-69. For additional protection of the cable route element from mechanical damage, dust, and debris, use the "PLUS" series angle cover.