Horizontal tray angle 45deg. 600x80 steel 1.2mm "PLIUS" GLplus45-80-600 HD KM PL1388 SYSTEM KM

To change the direction of the cable route, we recommend using a 45-degree horizontal angle from the "PLUS" series, which allows for turning power and low-voltage lines in a horizontal plane, and the prepared ends of the product for lap joints accelerate the installation process. The section is suitable for connection with a metal sheet tray of the same series with a width of 600 mm and a side height of 80 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. For additional protection of the cable route element from mechanical damage, dust, and debris, use a cover for the "PLUS" series angle.