Vertical external angle for tray 100x300mm with 180 degree bend "PLUS" HD85 KM PL18557 SYSTEM KM

To turn a cable route downwards by 90 degrees, a vertical external angle from the 'PLUS' series is used with a 180-degree route rotation. The shaped product creates a smooth bend and prevents damage to the cable route during installation. The element is suitable for connection with a metal sheet tray of the same series with a width of 300 mm and a side height of 100 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. Special connecting tabs on the section body provide the necessary rigidity of the butt joint and the integrity of the route. For additional protection of the cable route element from mechanical damage, use a cover.