Vertical external corner for tray 100x600mm with 180deg track turn. "PLÜS" HD85 KM PL18560 KM SYSTEM

To turn the cable route downwards by 90 degrees, a "PLUS" series external vertical angle with a 180-degree route reversal is used. The shaped product creates a smooth bend and prevents damage to the cable route during installation. The element is suitable for connection with a metal sheet tray of the same series with a width of 600 mm and a side height of 100 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor areas, outdoors, and in mildly corrosive environments, in accordance with GOST 15150-69. Special connecting tabs on the section body provide the necessary rigidity of the butt joint and the integrity of the route. Use a cover for additional protection of the cable tray element from mechanical damage.