Vertical tray angle internal R 100x100mm with 90 degree turn "PLUS" HD85 KM PL17650 KM SYSTEM

The vertical internal right-angle 90 degree bend of the "PLUS" series allows for turning the cable route upwards in a vertical plane, while rotating the open part of the tray around its axis. The element is suitable for connection with a metal sheet tray of the same series with a width of 100 mm and a side height of 100 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. Integrated tabs for quick connection to the tray facilitate the installation process. Special embossing on the bottom of the product ensures the integrity of the route. The element is part of a system for constructing cable routes of any complexity at industrial, civil, and commercial facilities.