Piercing clamp OR-645 (P645; ST 70; SLIW15.1; SLIW54; ZOII 16-95/2.5-35; P2x95; ZPO 16-150/4-50) MZVA 00000335

OR 645 piercing sealed branch clamp is designed for electrical connection of neutral and conducting cores of SIP during branching from the main line (copper or aluminum). Provides reliable electrical contact. Installation temperature up to -20°C. The bolt head stripping torque corresponds to the equivalent force required to create electrical contact of wires (main line, subscriber branch, lighting). Contact grease is applied to the piercing elements. Clamps are easily installed on the wire, no loose components. The bolt is isolated from the contact parts of the clamp, the bolt head is made of plastic. The possibility of fixing the lower part of the clamps with an S 19 key facilitates bolt tightening. Testing of the clamp for dielectric strength and tightness is carried out by full immersion in water at a voltage of 6 kV for 1 minute. Manufactured according to TU 3449-004-52819896-2010. Main line core cross-section, sq.mm: 16-150; Branch core cross-section, sq.mm: 4-50. Wire type: SIP-2 / SIP-4 Nominal main line core cross-section, sq.mm: 16 | 25 | 35 | 50 | 54,6 | 70 | 95 | 120 | 150 Nominal branch core cross-section, sq.mm: 4 | 5 | 6 | 8 | 10 | 16 | 25 | 35 | 50 Analogs from other manufacturers: P 645; ST 70; SLIW 15.1; SLIW 54; ZOII 16-95/2,5-35; P2x95; ZPO 16-150/4-50. Wrench head size, mm 13 Mass no more than, kg: 0,11 Quantity per pack: 100