Piercing clamp OR-95M (ZOI 25-95/25-95; P3x95; ZPO 16-95/16-95; ZPO 25-95/25-95; ZPO 50-150/50-150; SLIW17.1) MZVA 00003209

OR 95M piercing sealed tap connector is designed for the electrical connection of neutral and conducting cores of SIP during branch connections from the main line (copper or aluminum). Provides reliable electrical contact. Installation temperature up to -20°C. The bolt head shear torque corresponds to the equivalent force required to create electrical contact of the wires (main line, subscriber branch, lighting). Contact grease is applied to the piercing elements. OR-95M clamps are easy to install on the wire, with no loose components. The bolt is insulated from the contact parts of the clamp; the bolt head is made of plastic. The ability to fix the lower part of the clamps with an S 19 wrench facilitates bolt tightening. Testing of the OP-95M clamp for dielectric strength and tightness is carried out by full immersion in water at a voltage of 6 kV for 1 minute. Unlike the OR-95 clamp, the OR-95M clamp has a metal shear head. Manufactured according to TU 3449-004-52819896-2010. Main line core cross-section, sq.mm: 25-150 Branch core cross-section, sq.mm: 25-150 Wire type: SIP-2 / SIP-4 Nominal main line core cross-section, sq.mm 25 | 35 | 50 | 54.6 | 70 | 95 | 120 | 150 Nominal branch core cross-section, sq.mm 25 | 35 | 50 | 54.6 | 70 | 95 | 120 | 150 Analogs from other manufacturers: P3x95; ZPO 16-95/16-95; ZPO 25-95/25-95; ZPO 50-150/50-150; SLIW 17.1; P-70; P-95; P-150; ZOI 25-95/25-95; P3X-95; ZOP 16-95/16-150; SLIW 57; SLIW 67; CT25-150 P) Wrench head size, mm: 13 Mass no more than, kg: 0.14 Quantity per pack: 60