"PLUS" series vertical downward T-junction allows maintaining specified cable route bending radii during installation. The product modification is used to divert the route downwards, while rotating the open part of the metal tray around its axis by 90 degrees. The element is recommended for use with a metal sheet tray of the same series with a width of 150 mm and a side height of 80 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in mildly corrosive environments, in accordance with GOST 15150-69. The T-junction is easily installed using fasteners. Special connecting tabs on the section body provide the necessary rigidity of the joint assembly.