T-shaped cable tray bend, vertical down with 90deg route turn, 300x100 steel 1mm "PLUS" TDVplus90-100-300 HD KM PL3643 KM SYSTEM

The "PLUS" series vertical downward T-junction allows for maintaining the specified bending radii of the cable route during installation. The product modification is used to divert the route downwards, while rotating the open part of the metal tray around its axis by 90 degrees. It is recommended to use this element with a metal sheet tray of the same series with a width of 300 mm and a side height of 100 mm. The product is galvanized by hot-dip according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in mildly corrosive environments, in accordance with GOST 15150-69. The T-junction is easily mounted using fasteners. Special connecting tabs on the section body provide the necessary rigidity to the butt joint assembly.