T-shaped tray bend vertical up 50x200mm "PLUS" HD85 KM PL18192 KM SYSTEM

Vertical upward T-junction "PLUS" series allows maintaining the specified bending radii of the cable route during installation. The product modification is used to divert the route upwards. The element is recommended for use with a metal sheet tray of the same series with a width of 200 mm and a side height of 50 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The T-junction is easy to install using fasteners. Special connecting tabs on the section body ensure the required rigidity of the butt joint and the integrity of the route.