EMAS PVK10E Control Panel

PVK10E 10-button control pendant (with arrows), single-speed, PVK series, plastic housing (250V AC, 4A), IP65 TECHNICAL INFORMATION Contact group 1NO x 10 Rated current (ie) 4A (250V AC) Utilization category AC15 Mechanical life (minimum) 1000000 Electrical life (minimum) 100000 Insulation voltage (Ui) 300V Impulse withstand voltage (Uimp) 2.5kV Dielectric strength (contact-body) 2,500 V AC Dielectric strength (contact-contact) 1,500 V AC Insulation resistance 10 MOhm (500V DC) Operating temperature -15 / + 80 °C Pollution degree 3 Protection class IP65 Contact material AgNi Cable connection cross-section 1.5-2.5mm2 Clamping force 1.5Nm Short-circuit breaking capacity (Ics) 1kA PVK series No. of Speeds 1 EMAS PVK series control pendants are designed for controlling cranes, jib cranes, hoists, chain and wire rope hoists, overhead and gantry cranes. These pendants can have several versions: two, three, four, five, six, seven, eight, nine, ten, eleven, and twelve button, and can include emergency stop, alarm signal, signal, key mark, power on/off button (switch), light filter, motor speed increase or decrease keys, two or four position joysticks. EMAS control pendants are made of high-quality glass-fiber reinforced plastic. Advantages of control pendants: • Designed for d22mm buttons • Cable outlet seal • Easy installation • Housing reinforced with acrylonitrile butadiene styrene copolymer • Mechanical protection against simultaneous operation in the opposite direction • Aesthetic design and ergonomic housing