EMAS PVK2E Control Panel

PVK2E Control pendant 2 buttons (with arrows), single-speed, PVK series, plastic (250V AC, 4A), IP65 TECHNICAL INFORMATION Contact group 1NO x 2 Contact current (t.e.) 4A (250V AC) Utilization category AC15 Mechanical service life (minimum number) 1000000 Electrical service life (minimum number) 100000 Insulation voltage (Ui) 300V Rated impulse voltage (Uimp) 2.5kV Dielectric strength (contact with body) 2,500 V AC Dielectric strength (contact-contact) 1,500 V AC Insulation resistance 10 MOhm (500V DC) Operating temperature -15 / + 80 °C Pollution degree 3 Protection class IP65 Contact material AgNi Cable connection cross-section 1.5-2.5mm2 Tightening torque 1.5Nm Short-circuit breaking capacity (Ics) 1kA PVK series Number of speeds 1 EMAS PVK series control pendants are designed for controlling cranes, jib cranes, electric hoists, chain and wire rope hoists, overhead and gantry cranes. These pendants can have several versions: two, three, four, five, six, seven, eight, nine, ten, eleven, and twelve buttons, and include emergency stop, alarm signal, signal, key switch, on/off power button, light filter, speed up or slow down motor keys, and two or four position joysticks. EMAS control pendants are made of high-quality glass-fiber reinforced plastic, Advantages of control pendants: • Designed for d22mm buttons • Cable outlet seal • Easy installation • Housing reinforced with acrylonitrile butadiene styrene copolymer • Mechanical protection against simultaneous operation in opposite directions • Aesthetic design and convenient housing