EMAS PVK4E Control Unit

PVK4E Control Pendant 4 buttons (with arrows), single-speed, PVK series, plastic enclosure (250V AC, 4A), IP65 TECHNICAL INFORMATION Contact group 1NO x 4 Contact current (ie) 4A (250V AC) Utilization category AC15 Mechanical service life (minimum) 1000000 Electrical service life (minimum) 100000 Insulation voltage (Ui) 300V Impulse withstand voltage (Uimp) 2.5kV Dielectric strength (contact-body) 2,500 V AC Dielectric strength (contact-contact) 1,500 V AC Insulation resistance 10 MOhm (500V DC) Operating temperature -15 / + 80 °C Pollution degree 3 Protection class IP65 Contact material AgNi Cable connection cross-section 1.5-2.5mm2 Tightening torque 1.5Nm Short-circuit breaking capacity (Ics) 1kA PVK series Number of speeds 1 EMAS PVK series control pendants are designed for controlling cranes, jib cranes, electric chain/wire rope hoists, overhead and gantry cranes. These pendants may have several versions: two, three, four, five, six, seven, eight, nine, ten, eleven, and twelve button, and include emergency stop, alarm signal, signal, key switch, on/off power button, light filter, motor speed up/down keys, and two or four position joysticks. EMAS control pendants are made of high-quality glass-fiber reinforced plastic. Advantages of control pendants: • Designed for d22mm buttons • Cable outlet seal • Easy installation • Enclosure reinforced with acrylonitrile butadiene styrene copolymer • Mechanical protection against simultaneous operation in opposite directions • Aesthetic design and ergonomic enclosure