Control panel PV5AC20B22 EMAS PV5AC20B22

5-button control pendant (first button key-mark CP200AC20, 1NO), single-speed, PV series (250V AC, 4A), IP65 TECHNICAL INFORMATION Contact group 1NO Rated current (te) 4A (250V AC) Utilization category AC15 Mechanical life (minimum) 1000000 Electrical life (minimum) 100000 Insulation voltage (Ui) 300V Impulse withstand voltage (Uimp) 2.5kV Dielectric strength (contact-to-earth) 2500V AC Dielectric strength (contact-to-contact) 1500V AC Insulation resistance 10 MOhm (500V DC) Operating temperature -15 / +80°C Pollution degree 3 Protection class IP65 Contact material AgNi Cable connection cross-section 1.5-2.5mm2 Clamping force 1.5Nm Short-circuit breaking capacity (Ics) 1kA PV series Number of speeds 1 EMAS PV series control pendants are designed for controlling cranes, jib cranes, electric hoists, chain and wire rope hoists, overhead and gantry cranes. The PV series pendant can also have several versions: two, three, four, five, six, seven, eight, nine, ten, eleven, and twelve button, and can include emergency stop, alarm signal, signal, key-mark, power on/off button (switch), light filter, motor speed increase or decrease keys, two or four position joysticks. EMAS control pendants are made of high-quality glass-fiber reinforced plastic. Control pendant advantages: • Designed for d22mm buttons • Cable outlet seal • Easy installation • Housing reinforced with acrylonitrile butadiene styrene copolymer • Mechanical protection against simultaneous operation in the opposite direction • Aesthetic design and ergonomic housing