Solderable heat shrink connector L-40 mm 0.5-1.5mm2 (Pack 1.5) red Rexant 08-0752

Solderable heat shrink connector (L-40 mm) 0.5-1.5 mm2 red REXANT is designed for connecting copper multi-strand wires in overlap or butt joint using heat treatment. The non-standard wire connection method is due to its special design: - transparent insulation material is used to provide visual control of the installation process; - a low-temperature tin-lead solder sleeve is located in the middle of the connector; - adhesive strips are located on the inner surface of the heat shrink tube on both sides, ensuring the tightness of the connection after shrinkage. Flux must be used for a high-quality connection. Main characteristics: Cross-section of copper multi-strand wires used: 0.5-1.5 mm2 Connector length: 40 mm Maximum allowable voltage: 690 V Heat resistance of insulation material: 125 °C Ingress protection: IP67 Insulation material: cross-linked polyethylene, halogen-free Color of thermoplastic adhesive strips: red To achieve the best result, it is necessary to heat the solder ring evenly from all sides until it melts around the contact connection of the wire cores.