Vertical external tray angle 50x150mm with 180deg bend "PLUS" HD85 KM PL18562 KM SYSTEM

To turn the cable route downwards by 90 degrees, a "PLUS" series external vertical angle with a 180-degree route turn is used. The shaped product creates a smooth bend and prevents damage to the cable route during installation. The element is suitable for connection with a metal sheet tray of the same series with a width of 150 mm and a side height of 50 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. Special connecting tabs on the section body provide the necessary rigidity of the joint assembly and the integrity of the route. For additional protection of the cable route element from mechanical damage, use a cover.