Vertical external cable tray angle 80x100mm with 180deg bend "PLUS" HD85 KM PL18569 KM SYSTEM

For a 90-degree downward turn of the cable tray, a "PLUS" series external vertical angle with a 180-degree tray rotation is used. The shaped product creates a smooth bend and prevents damage to the cable tray during installation. The element is suitable for connection with a metal sheet tray of the same series with a width of 100 mm and a side height of 80 mm. The product is galvanized by hot-dip method according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in mildly corrosive environments, in accordance with GOST 15150-69. Special connecting tabs on the section body ensure the necessary rigidity of the joint assembly and the integrity of the tray. For additional protection of the cable tray element from mechanical damage, use a cover.