Vertical external bend L 100x200mm with 90deg turn "PLÜS" HD85 KM PL18470 KM SYSTEM

A vertical external left angle with a 90-degree rotation of the open part of the tray around its axis is used to change the direction of the cable route during installation. This bend prevents damage to the cable route during its laying. It is recommended to use this element with a metal sheet tray of the same series with a width of 200 mm and a side height of 100 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. Connection between sections is made using suitable fasteners. For additional protection of the cable tray element from dust and debris, use a cover for the "PLUS" series angle.