Vertical external corner for tray R 50x300mm with 90deg track turn. "PLÜS" HD85 KM PL18487 KM SYSTEM

To change the direction of the cable route during installation, a special shaped section has been developed – a vertical external right angle with a 90-degree rotation of the open part of the tray around its axis. This bend prevents damage to the cable route during laying. It is recommended to use this element with a metal sheet tray of the same series with a width of 300 mm and a side height of 50 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor areas, outdoors, and in mildly corrosive environments, in accordance with GOST 15150-69. The connection between sections is made using suitable fasteners. For additional protection of the cable tray element from dust and debris, use the "PLUS" series corner cover.