Vertical internal tray angle with 90deg turn 150x80 steel 1mm "PLUS" NLPDplus90-80-150-L HD KM PL3886 SISTEMA KM

A special shaped section has been developed to change the direction of the cable route during installation – a vertical external left bend with a 90-degree rotation of the open part of the tray around its axis. This bend prevents damage to the cable route during installation. It is recommended to use this element with a metal sheet tray of the same series with a width of 150 mm and a side height of 80 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in mildly corrosive environments, in accordance with GOST 15150-69. Connection between sections is made using suitable fasteners. For additional protection of the cable route element against dust and debris, use a cover for the "PLUS" series corner.